Cup Wrap Instruction

1. Clean the glass and make sure the glass is clean from any hand oils.

2. Place the glass cup on a stable and flat surface.

3. Peel design film transfer from backing.

4. Line the design film on the glass cup and lay design film down in the center.

5. Squeegee the film down, working from the center outwards, pushing out any bubbles (Credit Cards work great for this).

6. Rub, Rub, Rub. The more rubbing the better.

7. Peel clear film off slowly and DONE!

8. For the best result, use a hair dryer or heat gun to blow the wrap with low heat for about 20 seconds. Gently press down the wrap. DO NOT RUB THE VINYL DIRECTLY!!